MoxMec | Mechatronics Modules | Circular ADER | Circular vibrating piezo-electric bases

Circular ADER

Circular vibrating piezo-electric bases

Bases on which different types of bowls can be mounted: conical, cylindrical and spiral form, with a diameter from, 100 mm to 800 mm.

MoxMec TECHNOLOGY APPLIED

 

SIMPLE ADJUSTMENT WITHOUT 
ACTION ON THE BASE

Powered at 100-220V, 50-60Hz. No need to adjust the springs. A lot of working hours are guaranteed. The frequency can be set by means of digital regulator.

DISCOVER THE NEXT
MoxMec | SIMPLE ADJUSTMENT WITHOUT 
ACTION ON THE BASE

STABLE AND CONSTANT FEEDING

A stable and constant feeding speed is guaranteed. Particularly suitable for the feeding and orienting of small, light and thin workpieces.

DISCOVER THE NEXT
MoxMec | STABLE AND CONSTANT FEEDING

NO MAGNETIC FLUX

Due to the lack of magnet into the base, no magnetic effect is given by the drive unit on parts to be fed and oriented.

DISCOVER THE NEXT
MoxMec | NO MAGNETIC FLUX

NO HEAT

Piezo elements are safe and have no possibility of overheating or ignition.

DISCOVER THE NEXT
MoxMec | NO HEAT

LOW DOWN

Extremely reduced dimensions allow the use of the piezo vibrating feeder in spaces where the conventional bowl feeder is not feasible.

DISCOVER THE NEXT
MoxMec | LOW DOWN

IMPORTANT ENERGY SAVING

The piezo base permits a power consumption reduced up to 70 times lower than the electromagnetic feeders. This is proven by some tests carried out in collaboration with a customer.

DISCOVER THE NEXT
MoxMec | IMPORTANT ENERGY SAVING

REDUCED TIMES FOR INSTALLATION, CHANGES OF PRODUCTION AND MAINTENANCE

This is possible thanks to the dowelled bases that enable a fast and accurate connection of the chute or the bowl. For some models, the use of dowelling, helps also the centring of the base on the fixing plate, facilitating possible replacements. Furthermore, we can guarantee a tolerance of only 2 hundredths of a millimeter, avoiding set up problems.

DISCOVER THE NEXT
MoxMec | REDUCED TIMES FOR INSTALLATION, CHANGES OF PRODUCTION AND MAINTENANCE

EASIER AND FASTER DESIGN

The 3D CAD models are faithful and friendly because report directly, on the designed piece, useful information for the designer: (proper positioning of the piece, other components by which it can be hooked, etc.). In this way he is not forced to continuously consult the catalogue.

DISCOVER THE NEXT
MoxMec | EASIER AND FASTER DESIGN

TRACEABILITY AND HIGHEST RELIABILITY

Through the unique coding system of each single produced piece that allows to rebuild the whole story.

DISCOVER THE NEXT
MoxMec | TRACEABILITY AND HIGHEST RELIABILITY

MoxMec® Technology at Your Service

Discover It!

Features

  ADER 00 ADER 02 ADER 05 ADER 10 ADER 20 ADER 30 ADER 40 ADER 46
Voltage 0÷250V 50-60Hz or 24V DC 0÷250V 50-60Hz
Amperage (mA) 8 15 37 65 90 165
Oscillations (Hz) 0÷255 0÷240 0÷223 0÷210 0÷165 0÷152 0÷115
Base Weight (kg) 1,7 3,3 5,3 12,3 17,8 32,6 53
Max bowl weight (kg) 0,3 0,6 2 3 5 8 14 25
Max Weight of pieces (kg) 0,2 0,4 0,8 1,5 2,5 3 5
Temperature (°C) 0÷40
Humdity (%) 10÷90
Controller (W) 20 40